1994 Dodge Ram 3500 Cummins Build

I have been in the process of rebuilding a 1994 Dodge Ram 3500 with a P-Pump 12 Valve Cummins. When I purchased the truck it was in very rough shape. Front fenders we’re all rusted out and dented, cab corners all rusted out, grill broken, bumper smashed in and the truck was painted 4 different colours. The interior was also not great, seats ripped etc. This truck is a cab and chassis and the flat deck was also completely rusted out. Also the engine would run but would stall out shortly after starting. Since getting the truck I have now replaced both front fenders, repaired the rust on the cab corners, repaired the body, sanded the truck down and repainted the entire body back to its original colour. I have completely swapped out the entire interior changing the interior colour from blue to grey. I re-did the headliner myself as the original one was all falling apart. I replaced the dash as the original one was all cracked and broken, and swapped the seats from a third gen dodge into it. I also replaced all door and window seals etc while I was at it. On the engine I had to pull the injection Pump and get it rebuilt. I re-did the entire fuel system front to back replacing all lines and installed an electric lift pump. This truck was also a Dually so now I have switched that to a single rear wheel. Last projects will be shortening the wheelbase as this truck being a cab and chassis has a very long wheel base and I would like it to be back to a long box wheel base. Once that is completed the final projects will be building a new flat deck, installing a fifth wheel hitch, building a new front bumper and installing a 3” lift